AluFlam - logo
  • by Application
    • Windows & Vision Walls
    • Curtain Walls
    • Swinging Doors
  • by Rating
    • 20 & 45 Minute
    • 60 Minute Fire Resistive
    • 120 Minute
  • About
    • Company
    • Updates
    • Global Website
  • Gallery
  • Resources
    • Specs & Drawings
    • Finishes
    • Glazing
    • Insulated Glass Units
    • Butt Joint Glazing
    • Education
    • Videos
    • Product Summary
    • Case Studies
    • Faqs
  • Reps
  • Pricing
  • Contact Us

Contact Us

To contact Aluflam by email, click on appropriate button below and fill out the corresponding form.

Glazing Contractors
Architects / Designers / Specifiers
General Contractors / Distributors
General Info

Aluflam North America
16604 Edwards Road
Cerritos, CA 90703
Ph: 562.926.9520
Fax: 562.404.1394

Aluflam North America, 16604 Edwards Road, Cerritos, CA 90703 562.926.9520
Copyright © 2025 Aluflam North America. All Rights Reserved

Hestia | Developed by ThemeIsle

Multitude of finish options

Aluminum framing designs are available in a multitude of finish options.

  • ANODIZING

    • AAMA 611 – CLASS I
      Class I anodic coating is a high-performance finish used for exterior building structures and other products that must withstand continuous outdoor exposure. Class I anodize is more resistant to salt spray and the sea coast, and it is more durable in high traffic areas.
  • PAINTING [FLUORPOLYMER COATING [AAMA STANDARDS?]

    • 70% PVDF Kynar – AAMA 2605 Superior Performing Organic Coatings
    • 70% PVDF resin-based coatings are often referred to as Kynar or Kynar 500.  Kynar 500 is a registered trademark of Arkema Inc.  Hylar 5000 is a registered trademark of Solvay.  These coatings offer the best performance for outdoor exposure in terms of resistance to humidity, color change, chalk, and gloss retention.  The humidity and salt spray resistance is referred to as 4,000 hours of intense testing.  This is a long-lasting durable finish that withstands the harshness of nature and time.  No other coatings on aluminum are superior.
    • 50% PVDF Kynar – AAMA 2604 High Performance Organic Coatings
    • 50% PVDF resin-based coatings offer good color and gloss retention for outdoor exposure.  It offers good hardness and abrasion resistance.  The humidity and salt spray resistance is referred to as 3,000 hours of intense testing.  These coatings are often used for storefront, doors, or other high traffic areas.
    • Baked Enamels – AAMA 2603 Pigmented Organic Coatings
    • Baked enamel coatings do not require a base coat of primer.  Baked enamels are harder than PVDF coatings and are often used for interior applications where color retention, chalking, fading and weatherability are not required.   The humidity and salt spray resistance is referred to as 1,000 hours of testing.  Not recommended for exterior use.

All finishing is done before fabrication to assure ultimate adhesion and finish quality, and stringent quality control guidelines are followed throughout the process.